Why Is My Water Bill Suddenly So High? How to Find Hidden Plumbing Leaks in Liberty Hill & Austin, TX

Opening your monthly water bill and discovering an unexpected increase can be frustrating, especially when your household hasn't changed its water usage.
Maybe your bill has doubled. Perhaps you're using the same amount of water as usual, but your utility company reports significantly higher consumption. Or you may have noticed a gradual increase over several months without an obvious explanation.
For homeowners in Liberty Hill, Austin, Georgetown, Leander, Cedar Park, and surrounding Central Texas communities, an unusually high water bill can sometimes be an early warning sign of a hidden plumbing leak.
The challenge is that not every water leak leaves behind an obvious puddle. Water can escape beneath concrete foundations, inside walls, underground, or through plumbing fixtures that appear to be functioning normally.
At OnCall Plumbing, we help homeowners identify and repair hidden plumbing leaks before they lead to unnecessary water waste or costly property damage.
Below, we'll explain the most common reasons for sudden water bill increases, how to check for hidden leaks, and when to schedule professional water leak detection in Liberty Hill, TX.
1. A Running Toilet Could Be Wasting Water Without You Knowing
One of the first places to investigate when your water bill increases is your toilet.
A toilet can continue leaking water from its tank into the bowl even when nobody is using it.
Because the water flows directly into the drain, you may never notice water on the bathroom floor.
Common Causes of a Running Toilet
Several components can contribute to water waste:
Worn flapper: A deteriorated flapper may allow water to escape from the tank into the bowl.
Faulty fill valve: A malfunctioning fill valve may allow the tank to overfill or refill continuously.
Incorrect float adjustment: If the water level is too high, excess water may enter the overflow tube.
Damaged flush valve seal: A worn seal may prevent the tank from holding water properly.
How to Check for a Toilet Leak
A simple dye test can help identify certain toilet leaks.
Remove the toilet tank lid.
Add several drops of food coloring to the tank water.
Avoid flushing for approximately 15 to 30 minutes.
Check the water inside the toilet bowl.
If colored water appears in the bowl without flushing, water is leaking from the tank into the bowl.
A running toilet may waste substantial amounts of water, depending on the severity of the problem.
For additional troubleshooting advice, read our article Toilet Overflowing or Won't Stop Running? Here's What Liberty Hill & Austin Homeowners Should Know.
Need help with a running toilet or unexplained water usage? Schedule plumbing service with OnCall Plumbing or call 512-288-1564.
2. Hidden Slab Leaks Can Cause Unexpected Water Bill Increases
Many Central Texas homes are built on concrete slab foundations.
In some homes, water supply lines run beneath or through the foundation. If one of these pipes develops a leak, water may escape without being immediately visible.
This is commonly referred to as a slab leak.
What Causes Slab Leaks?
Potential contributing factors include:
Pipe corrosion
Aging plumbing materials
Ground movement and foundation settling
Abrasion where pipes contact surrounding materials
Excessive or fluctuating water pressure
Installation defects
Deteriorating pipe connections
Because the affected pipes are concealed, slab leaks may continue for an extended period before homeowners recognize the problem.
Warning Signs of a Slab Leak
In addition to higher water bills, homeowners may notice:
Warm spots on flooring, particularly with a leaking hot water line
Unexplained dampness
Water appearing near the foundation
The sound of running water when fixtures are turned off
Reduced water pressure
Flooring damage
Persistent moisture or musty odors
These symptoms can have other causes, so professional diagnosis is important.
Can a Slab Leak Damage Your Foundation?
Water escaping beneath a home may affect surrounding soil and building materials.
Depending on the amount of water, soil conditions, and duration of the leak, prolonged moisture problems can contribute to property damage.
However, not every slab leak causes structural foundation damage.
Early detection helps homeowners address the plumbing issue before additional complications develop.
For more information, read our existing article What Causes Slab Leaks in Austin Homes?.
Schedule Professional Slab Leak Detection
If your water bill has increased and you suspect a leak beneath your foundation, OnCall Plumbing offers professional water leak detection services.
Contact our plumbing team or call 512-288-1564 to schedule an evaluation.
3. Underground Water Line Leaks May Go Unnoticed
Not all hidden plumbing leaks occur beneath a home's foundation.
Some develop in underground water supply lines running between the water meter and the house.
These leaks can be particularly difficult to detect because the water may soak directly into the surrounding soil.
Signs of an Underground Water Leak
Look for:
Unexplained increases in water consumption
Wet or muddy areas during dry weather
Unusually green patches of grass
Reduced water pressure
Water pooling near the foundation
Sounds of water movement when fixtures are off
A leak may be present even when none of these outdoor signs appears.
Why Underground Pipes Develop Leaks
Common causes include pipe deterioration, ground movement, damage from landscaping or excavation, and failing connections.
Older pipes may also experience corrosion or other material related problems.
If the underground water line is damaged, a plumber can evaluate whether a localized repair or replacement is appropriate.
OnCall Plumbing provides plumbing repairs and leak detection throughout Liberty Hill, Austin, and surrounding Central Texas communities.
4. A Leaking Faucet or Showerhead Can Add Up Over Time
A dripping faucet may seem too minor to affect your monthly water bill.
However, continuous dripping can waste a surprising amount of water over several weeks.
Common causes include:
Worn washers or seals
Damaged cartridges
Deteriorated valve seats
Loose plumbing connections
Faulty shower valves
A leaking shower valve can also allow water to escape behind a wall, where the damage may not be immediately visible.
When Is a Faucet Leak More Serious?
A slow drip from the spout is often a relatively straightforward plumbing repair.
However, moisture inside cabinets, water stains behind fixtures, or damp drywall may indicate a concealed plumbing leak.
For additional information, read our article Leaky Faucet? Here's When You Can DIY and When You Should Call a Plumber.
If your faucet continues leaking after basic troubleshooting, contact OnCall Plumbing for professional repair.
5. Your Irrigation System Could Be Using More Water Than Expected
Outdoor watering is another possible reason for a sudden increase in water consumption.
During hot Central Texas weather, homeowners may increase irrigation schedules without realizing how much additional water they're using.
However, irrigation systems can also develop leaks.
Common Irrigation-Related Problems
Potential issues include:
Broken sprinkler heads
Leaking underground irrigation pipes
Valves that fail to close completely
Incorrect watering schedules
Sprinkler heads watering sidewalks or driveways
Controllers running more frequently than intended
How to Check Your Irrigation System
Review your irrigation controller and compare its current schedule with previous months.
Look for unusually wet areas, damaged sprinkler heads, or water flowing when the system should be off.
If you suspect an irrigation leak, an irrigation professional can inspect the affected system.
Important: Some properties have separate irrigation meters or private well systems. In those cases, irrigation water usage may not appear on the same bill as household water consumption.
6. Your Water Heater Could Be Leaking
Water heaters are another potential source of hidden water loss.
Traditional tank-style water heaters can develop leaks around valves, fittings, connections, or the storage tank.
Tankless water heaters can also leak from connections or internal components.
Signs Your Water Heater May Be Leaking
Watch for:
Water pooling near the heater
Corrosion around connections
Damp flooring
Unexplained water heater cycling
Water appearing around discharge or drain piping
A leaking temperature and pressure relief valve may discharge water through a pipe into a drain or other approved location, making the water loss less obvious.
Never cap or plug a water heater's safety relief valve discharge line.
If your water heater is leaking, a plumber can identify whether the problem involves a repairable component or a more serious equipment failure.
Explore OnCall Plumbing's water heater repair and installation services.
You can also read our related article Pipe Burst Under House: What to Do (Liberty Hill & Austin Homeowner Guide) for advice about more urgent plumbing leaks.
7. Your Water Usage May Have Increased Without a Plumbing Leak
Although hidden leaks are an important possibility, not every high water bill is caused by damaged plumbing.
Before assuming there's a leak, consider whether your household's water consumption has changed.
Common explanations include:
More frequent lawn watering
Filling or topping off a swimming pool
Additional household guests
More laundry or showers
Seasonal outdoor cleaning
A change in billing cycle length
A utility rate increase
A previously estimated meter reading being corrected
Compare Water Usage, Not Just the Dollar Amount
Look at the number of gallons or other consumption units shown on your bill.
If your total cost increased but your water consumption remained relatively stable, the difference may be related to utility rates, fees, or billing adjustments.
If your actual water consumption increased substantially without an explanation, it's worth investigating possible leaks.
How to Check for a Hidden Water Leak Using Your Water Meter
One of the most useful preliminary tests homeowners can perform is checking their water meter.
This can help determine whether water is moving through the metered system when no fixtures should be using it.
Step 1: Turn Off All Water-Using Fixtures
Make sure nobody is using:
Faucets
Showers
Toilets
Washing machines
Dishwashers
Irrigation systems
Other water-consuming appliances
Also make sure equipment such as water softeners isn't running a regeneration cycle.
Step 2: Locate Your Water Meter
Your water meter may be located near the street, sidewalk, or property boundary.
Some meters have a visible leak indicator, while others display digital readings.
Do not open utility equipment or enter a meter vault if doing so is unsafe or prohibited.
Step 3: Record the Meter Reading
Write down the reading or take a photograph.
If the meter has a leak indicator, observe whether it shows movement while all fixtures are off.
Step 4: Wait Without Using Water
Allow approximately 15 to 30 minutes to pass without using any water.
Then check the meter again.
Step 5: Compare the Readings
If the reading has increased, water may be flowing somewhere in the metered system.
This could indicate a leak, an appliance cycling, or another source of unexpected water usage.
A meter test doesn't identify the exact location of a leak.
It also may not detect every intermittent or very small leak.
What If Your Water Meter Continues Moving?
If your meter shows unexpected consumption, OnCall Plumbing can help investigate potential plumbing leaks.
Our professional water leak detection services in Liberty Hill are designed to help locate concealed plumbing problems and determine appropriate repairs.
Request a Leak Detection Appointment or call 512-288-1564.
How Do Professional Plumbers Find Hidden Water Leaks?
When a water leak isn't visible, professional diagnosis may require specialized tools and testing procedures.
The methods used depend on the plumbing system and suspected leak location.
Electronic Leak Detection
Electronic acoustic equipment can help plumbers identify sounds associated with pressurized water escaping from certain pipes.
This may be useful for some underground or concealed water line leaks.
Pressure Testing
A plumber may isolate portions of the plumbing system and conduct appropriate pressure tests.
A pressure loss can help identify a possible leak in the tested section, although further investigation may be necessary to locate it.
Moisture Detection
Moisture meters can help identify abnormal moisture levels in walls, floors, or other building materials.
Thermal Imaging
Thermal imaging equipment can sometimes identify temperature patterns associated with moisture or leaking hot water pipes.
However, thermal imaging does not directly see through concrete or walls, and its findings must be interpreted carefully.
Targeted Plumbing Inspection
In some cases, plumbers may need to inspect accessible piping, valves, fittings, or other components to confirm the source of a leak.
Professional leak detection can help reduce unnecessary exploratory demolition, although some leaks still require opening walls, floors, or other surfaces for confirmation and repair.
What Should You Do If You Discover a Major Water Leak?
If you discover active water escaping from a pipe or fixture, take action promptly.
1. Shut Off the Water Supply if Safe
Locate the appropriate fixture shutoff valve or main water shutoff.
If water is spreading rapidly, shutting off the main supply may help limit additional damage.
2. Avoid Electrical Hazards
Do not enter standing water near electrical outlets, wiring, or appliances.
If electrical equipment is affected, keep clear and contact an appropriate professional.
3. Protect Your Belongings
If safe, move furniture, electronics, and valuables away from the affected area.
4. Document the Damage
Take photographs of visible damage and retain relevant records for insurance purposes.
5. Contact a Licensed Plumber
A professional can identify the damaged component, stop the leak, and recommend repairs.
OnCall Plumbing offers 24/7 emergency plumbing services for urgent plumbing problems throughout its Central Texas service area.
For urgent plumbing assistance, call 512-288-1564.
For related advice, read No Water in the Home? What to Do During a Plumbing Emergency in Austin & Liberty Hill.
Can Smart Leak Detection Help Prevent High Water Bills?
Some homeowners want more than occasional manual water meter checks.
Smart water monitoring systems can help identify unusual water usage patterns and alert homeowners when potential problems develop.
OnCall Plumbing offers installation of the LeakSecure® smart leak detection system.
Depending on the system configuration, smart leak monitoring can provide:
Water usage monitoring
Alerts for unusual water consumption
Potential leak detection
Remote monitoring
Automatic water shutoff for certain detected conditions
These systems can be particularly useful for homeowners who travel frequently or want additional protection against unexpected water damage.
However, smart monitoring cannot guarantee that every leak will be detected or prevent all water damage.
For more information, read our existing article Protect Your Home from Costly Water Damage with LeakSecure® Smart Leak Detection.
Why Choose OnCall Plumbing for Water Leak Detection in Liberty Hill & Austin?
Finding a hidden plumbing leak requires more than simply repairing the first visible problem.
The source of the water loss must be identified so the appropriate repair can be completed.
OnCall Plumbing is a locally owned plumbing company based in Liberty Hill, Texas, serving homeowners throughout Austin and surrounding Central Texas communities.
Our plumbing services include:
Water leak detection
Slab leak evaluation and repair
Underground water line repair
Pipe repair and replacement
Water heater repairs
Toilet and fixture repairs
Emergency plumbing services
Preventive plumbing maintenance
Our team focuses on identifying the problem, explaining available repair options, and helping homeowners make informed decisions.
Whether you're dealing with an unexplained water bill increase or visible signs of water damage, a licensed plumber in Liberty Hill, TX can help determine the next step.
Schedule Water Leak Detection With OnCall Plumbing or call 512-288-1564.
Frequently Asked Questions About High Water Bills and Hidden Leaks
Why did my water bill suddenly double?
A sudden increase may result from a running toilet, underground leak, slab leak, irrigation problem, increased household water usage, or a billing adjustment. Comparing your water consumption and checking your meter can help narrow down the cause.
Can a hidden water leak cause a high water bill?
Yes. A concealed leak can allow water to escape continuously, increasing metered water consumption even when no fixtures are being used.
How can I tell if I have a water leak underground?
Possible signs include an unexplained water bill increase, damp soil, unusually green grass, reduced water pressure, or water meter movement when fixtures are off. Professional leak detection may be necessary to confirm the problem.
Can a running toilet significantly increase my water bill?
Yes. A continuously running toilet can waste substantial amounts of water, especially when the leak continues around the clock.
Will my water meter move if I have a leak?
A meter may register water flowing through the system when fixtures are off. However, meter behavior varies, and some leaks may be intermittent or too small to detect during a short test.
Can a slab leak happen without visible water damage?
Yes. Some slab leaks remain concealed for extended periods. An unexplained increase in water consumption may be one of the first noticeable signs.
Does homeowners insurance cover hidden plumbing leaks?
Coverage depends on your policy and the circumstances. Some policies may cover certain resulting water damage while excluding the cost of repairing the failed plumbing component or damage caused by long-term leakage. Review your policy with your insurer.
Can my water utility adjust a high bill caused by a leak?
Some utilities offer leak adjustment programs when qualifying leaks are repaired and documented. Eligibility, documentation requirements, and adjustment amounts vary by provider.
How much does professional water leak detection cost?
Costs vary based on the suspected leak location, accessibility, property size, and testing methods required. A plumbing company can explain its inspection and diagnostic charges.
Does OnCall Plumbing provide leak detection in Austin and Liberty Hill?
Yes. OnCall Plumbing offers water leak detection and repair services throughout Liberty Hill, Austin, Georgetown, Leander, Cedar Park, and surrounding Central Texas communities.
Schedule Water Leak Detection in Liberty Hill, Austin & Central Texas
An unexpectedly high water bill may be more than a billing inconvenience.
It can sometimes be an early warning sign of a hidden plumbing problem that is wasting water and potentially damaging your property.
Whether the issue involves a running toilet, leaking water heater, damaged underground pipe, or slab leak, identifying the cause is the first step toward an appropriate repair.
At OnCall Plumbing, we help homeowners throughout Liberty Hill, Austin, Georgetown, Leander, Cedar Park, Round Rock, and surrounding communities locate and address plumbing leaks.
Don't continue paying for unexplained water usage without investigating the cause.
Call 512-288-1564
OnCall Plumbing
Liberty Hill Office: 247 Clear Fork Loop, Liberty Hill, TX 78642
Austin Office: 7010 W Highway 71, Suite 143, Unit 150, Austin, TX 78735
Disclaimer: This article provides general plumbing information. Leak symptoms, testing procedures, and repair requirements vary by property. Contact a qualified professional for concealed leaks, major water damage, or unsafe conditions.





Comments