top of page
tankless water heater install liberty hill tx

Water Heater Not Working? 7 Common Problems That May Require Professional Repair

4 days ago
12 min read

Water Heater Not Working? 7 Common Problems That May Require Professional Repair
Water Heater Not Working? 7 Common Problems That May Require Professional Repair

Few household problems are as frustrating as turning on the shower and discovering that your water heater isn't working. Whether you're dealing with completely cold water, inconsistent temperatures, strange noises, or a leaking tank, water heater problems can quickly disrupt your daily routine.


For homeowners in Liberty Hill, Austin, Georgetown, Leander, and surrounding Central Texas communities, knowing the warning signs of water heater failure can help prevent additional damage and unexpected replacement costs.


At OnCall Plumbing, we provide professional water heater repair, replacement, and installation services for both gas and electric water heaters.


While some water heater problems have relatively simple explanations, others involve electrical components, gas controls, internal corrosion, or mechanical failures that require a licensed plumber.


Below, we'll explore seven common water heater problems, what they may indicate, and when it's time to schedule professional repairs.


1. Your Water Heater Isn't Producing Hot Water

One of the clearest signs of a water heater problem is a complete loss of hot water throughout your home.


The cause often depends on whether you have an electric or gas water heater.


Electric Water Heater Problems

Electric water heaters rely on heating elements and thermostats to maintain the desired water temperature.


Common causes of a complete loss of hot water include:


  • Tripped circuit breakers

  • Failed heating elements

  • Malfunctioning thermostats

  • Electrical wiring or connection problems

  • A tripped high-temperature safety cutoff


If your electric water heater suddenly stops working, check whether its circuit breaker has tripped.


If the breaker trips again, don't repeatedly reset it. This may indicate an electrical fault requiring professional attention.


Gas Water Heater Problems

Gas water heaters use a burner and gas control system to heat the water.


Potential problems include:


  • Pilot light or electronic ignition failure

  • Faulty thermocouple or flame sensor

  • Gas control valve malfunction

  • Burner problems

  • Gas supply interruptions


Modern gas water heaters may also display diagnostic error codes that help identify the issue.


Important: If you smell gas, leave the area immediately and contact your gas utility or emergency services from a safe location. Do not operate switches, attempt repairs, or relight the appliance.


When to Call a Water Heater Repair Plumber

If your water heater has power or gas available but still isn't heating properly, a professional inspection can identify the underlying problem.


At OnCall Plumbing, our technicians evaluate water heater components and recommend appropriate repairs or replacement when necessar

y.


Need water heater repair in Liberty Hill or Austin? Schedule an appointment or call 512-288-1564.


2. Your Hot Water Runs Out Too Quickly

Does your shower start hot but turn cold after only a few minutes?


Running out of hot water faster than usual doesn't always mean your water heater has completely failed.


Several issues may be responsible.


A Failing Heating Element

Many electric tank water heaters have two heating elements.


If one element stops functioning, the system may still produce some hot water, but its available capacity or recovery rate can decrease significantly.


A Damaged Dip Tube

The dip tube directs incoming cold water toward the bottom of the tank.


If it breaks or deteriorates, cold water may mix with hot water near the top of the tank, causing water temperatures to drop sooner than expected.


Increased Household Demand

Your water heater may simply be too small for your family's current needs.

For example, running the dishwasher, washing machine, and multiple showers close together can quickly exhaust a traditional tank water heater.


Sediment Accumulation

Mineral deposits inside the tank can also interfere with efficient heat transfer and contribute to performance problems.


If your hot water supply has gradually decreased, a plumber can determine whether the issue involves a failing component, sediment accumulation, or an undersized system.



3. Your Water Heater Makes Popping, Rumbling, or Banging Noises


Water heaters aren't completely silent, but new or unusually loud sounds may indicate a problem.


Homeowners commonly describe:

  • Popping sounds

  • Rumbling

  • Crackling

  • Knocking

  • Banging noises


Why Does a Water Heater Make Popping Noises?

One possible cause is sediment buildup at the bottom of a traditional water heater tank.


As mineral deposits accumulate, water trapped beneath the sediment may heat and produce popping or rumbling sounds.


Central Texas water supplies can contain minerals that contribute to scale accumulation, although water hardness varies by location and supply source.

Over time, significant sediment buildup may reduce heating efficiency and contribute to additional wear.


Can Sediment Damage a Water Heater?

Excessive sediment may contribute to:

  • Reduced heating performance

  • Higher energy consumption

  • Unusual noises

  • Overheating of certain components

  • Accelerated deterioration in some systems


Routine maintenance may help reduce these problems.


OnCall Plumbing offers water heater inspections and maintenance services, including flushing when the condition of the equipment allows.


If your water heater has become noticeably louder, schedule an inspection rather than waiting for it to stop working.


You can also learn more about our water heater maintenance plan.


Hearing unusual noises from your water heater? Call OnCall Plumbing at 512-288-1564 or request professional service online.


4. Your Water Heater Is Leaking

Water around the base of a water heater is a warning sign that should never be ignored.

Even a small leak can damage flooring, drywall, and nearby belongings.


However, not every water heater leak means the tank needs to be replaced.


Common Sources of Water Heater Leaks


Loose plumbing connections

Water may escape from fittings or supply connections near the top of the water heater.


Drain valve problems

A worn or damaged drain valve can allow water to leak from the lower portion of the tank.


Temperature and pressure relief valve discharge


The temperature and pressure relief valve is an important safety component designed to release water under certain unsafe conditions.


Discharge may indicate excessive pressure, overheating, thermal expansion problems, or a faulty valve.


Never cap, plug, or disable this valve.


Internal tank corrosion

If the water heater tank itself has developed a leak, replacement is generally necessary because the tank cannot usually be repaired safely or reliably.


What Should You Do If Your Water Heater Is Leaking?

If you discover water around your heater:

  1. Avoid contact with water near electrical equipment.

  2. If safe, shut off the water supply to the heater.

  3. Follow the manufacturer's instructions for safely shutting down the appliance, or contact a professional.

  4. Keep the surrounding area clear.

  5. Contact a licensed plumber for an inspection.


If the leak is substantial or cannot be isolated safely, contact an emergency plumbing professional.


OnCall Plumbing provides 24/7 emergency plumbing assistance throughout its Central Texas service area.


5. Your Water Heater Produces Rusty or Discolored Hot Water

Rust-colored or discolored hot water can be concerning, particularly when the discoloration appears suddenly.


Possible causes include:


  • Corrosion inside the water heater tank

  • A deteriorating sacrificial anode rod

  • Sediment and mineral deposits

  • Corroded plumbing pipes

  • Disturbances in the water supply


Is the Water Heater Causing the Discoloration?

One useful observation is whether the discoloration affects only hot water or both hot and cold water.


If only the hot water is discolored, the water heater or hot-water piping may be involved.


If both are affected, the source may be elsewhere in the plumbing or water supply system.


This distinction doesn't provide a complete diagnosis, but it can help your plumber investigate.


What Does the Anode Rod Do?

Many traditional tank water heaters contain a sacrificial anode rod.

This component is designed to corrode preferentially, helping protect the steel tank from corrosion.


As the anode rod deteriorates, the tank may become more vulnerable to rust.

Regular inspection and replacement when appropriate may help extend the useful life of certain water heaters.


If you notice recurring discoloration, don't assume it is harmless. Have the water and plumbing system evaluated, and avoid using discolored water for drinking or cooking until its safety is established.


6. Your Water Temperature Keeps Changing

Does your water alternate between hot and lukewarm? Do you have difficulty maintaining a comfortable shower temperature?


Inconsistent water temperatures can indicate a problem with the heater or a fixture.


Common Causes of Fluctuating Water Temperature

Faulty thermostat

A malfunctioning thermostat may prevent the system from maintaining the desired temperature.


Failing heating element

An electric water heater with a damaged heating element may heat inconsistently or recover slowly.


Sediment buildup

Mineral deposits can affect the heater's performance.


Plumbing mixing problems

A faulty shower valve or mixing valve may allow hot and cold water to mix improperly.


Tankless water heater problems

Some tankless systems may experience temperature fluctuations due to flow-rate limitations, scale accumulation, ignition problems, or sensor issues.


If you're considering an on-demand system, explore our tankless water heater services.


Could the Temperature Setting Be the Problem?

Yes. In some cases, the water heater may simply be set too low or too high.


However, changing the temperature without understanding the system can create scalding risks.


The U.S. Department of Energy commonly recommends a setting around 120°F for many households, although individual health needs, equipment requirements, and plumbing configurations may affect the appropriate setting.


If you're unsure about your water heater's controls, ask a qualified professional for assistance.


7. Your Water Heater Keeps Needing Repairs

An occasional water heater repair doesn't necessarily mean you need a replacement.


However, repeated problems can indicate that the system is approaching the end of its useful life.


Warning signs include:


  • Frequent breakdowns

  • Increasing repair costs

  • Recurring leaks

  • Poor heating performance

  • Significant corrosion

  • Unusual noises that continue after maintenance

  • A system that no longer meets household demand


How Long Should a Water Heater Last?

Traditional tank water heaters often last approximately 8 to 12 years, although actual lifespan depends on equipment quality, water conditions, installation, maintenance, and usage.


Some systems last longer, while others fail earlier.


If your water heater is more than a decade old and requires another major repair, it may be worth comparing repair costs with replacement options.



Water Heater Repair vs. Replacement: Which Is More Cost-Effective?

When your water heater stops working, you may wonder whether repairing the unit is worth the expense.


The answer depends on several factors.

Consideration

Repair May Make Sense

Replacement May Be Better

Age

Relatively newer system

Older system near the end of its expected lifespan

Problem

Replaceable component

Leaking or severely corroded tank

Repair history

First significant problem

Frequent recurring repairs

Cost

Repair is reasonable compared with replacement

Repair cost approaches replacement cost

Performance

Meets household hot water needs

Consistently undersized or inefficient

A professional inspection can help determine which option offers the best long-term value.


At OnCall Plumbing, we provide both water heater repair and installation, allowing homeowners to explore their options based on the condition of their equipment.


Not sure whether to repair or replace your water heater? Contact OnCall Plumbing for an evaluation or call 512-288-1564.


What Can You Safely Check Before Calling a Water Heater Plumber?

Not every water heater problem requires extensive troubleshooting.


There are several simple observations you can make without opening the appliance or attempting repairs.


Check Whether the Problem Affects Every Faucet

Turn on the hot water at more than one fixture.


If the problem occurs throughout the home, the water heater may be involved.

If only one faucet or shower is affected, the issue could involve that fixture or its plumbing.


Look for Visible Water Leaks

Check the surrounding floor and visible plumbing connections for moisture.

Avoid touching electrical equipment or entering standing water near the appliance.


Check for an Error Code

Some modern water heaters display diagnostic codes.

Write down the code and consult the manufacturer's instructions.


Consider Recent Hot Water Usage

If several people have showered consecutively, a traditional tank water heater may simply need time to recover.


Check the Electrical Panel

For an electric water heater, you can check whether the circuit breaker is tripped.

Do not repeatedly reset a breaker that continues to trip.


Know When to Stop Troubleshooting

Water heaters involve high temperatures, pressurized water, electricity, and potentially combustible gas.


Avoid removing electrical covers, bypassing safety controls, modifying gas connections, or attempting unfamiliar repairs.


A licensed plumber can safely evaluate problems that go beyond basic observations.


Why Water Heater Problems Are Common in Central Texas

Homes throughout Liberty Hill, Austin, Georgetown, Leander, Cedar Park, and surrounding communities may experience water heater problems related to local water conditions and household demand.


Hard Water and Mineral Buildup

Many Central Texas water supplies contain dissolved minerals that can accumulate inside plumbing fixtures and water heaters.


Scale and sediment can contribute to reduced heating performance and maintenance needs.


Growing Household Hot Water Demand

As families grow or homeowners add bathrooms and appliances, an existing water heater may no longer provide adequate hot water.


Temperature Changes and Seasonal Demand

Incoming water temperature can affect how much energy a heater needs to reach its target temperature.


During colder weather, some systems may take longer to recover or deliver less usable hot water than homeowners expect.


Aging Equipment

Older systems may develop worn heating elements, faulty controls, corroded components, or internal tank problems.


Routine inspections can help identify some concerns before they result in a complete loss of hot water.


How to Help Prevent Unexpected Water Heater Repairs

While not every breakdown is preventable, regular maintenance can help identify developing problems and support reliable performance.


Schedule Routine Water Heater Inspections

A professional inspection may include evaluating:

  • Visible plumbing connections

  • Shut-off valves

  • Safety components

  • Signs of corrosion

  • Water heater performance

  • Anode rod condition, where accessible

  • Sediment accumulation


Address Sediment Buildup

Flushing may help remove sediment from certain tank water heaters.

However, older or neglected systems may require special consideration, and flushing is not appropriate in every situation.


Monitor Changes in Performance


Pay attention to:

  • Reduced hot water supply

  • Unusual noises

  • Water discoloration

  • Leaks

  • Increasing energy consumption


These changes may indicate that maintenance or repairs are needed.


Consider a Plumbing Maintenance Plan

OnCall Plumbing offers an Elite Access Plumbing Maintenance Plan that includes annual water heater inspections and eligible maintenance services.

Regular professional attention can help homeowners identify concerns before they become larger problems.


Why Choose OnCall Plumbing for Water Heater Repair?

When your water heater isn't working, you need a plumbing company that can identify the problem and explain your options clearly.


OnCall Plumbing provides residential and commercial plumbing services throughout Liberty Hill, Austin, and surrounding Central Texas communities.

Our team offers:


  • Licensed plumbing professionals: Experienced technicians who evaluate plumbing systems and recommend appropriate solutions.

  • Water heater repair and replacement: Service for traditional gas and electric water heaters.

  • Tankless water heater services: Installation, maintenance, and repair options for on-demand hot water systems.

  • Emergency plumbing assistance: Help when unexpected plumbing problems require prompt attention.

  • Clear communication: An explanation of the problem and available repair or replacement options.


Whether you're experiencing a minor heating issue or a complete system failure, our team can help determine the next step.


If you're looking for a reliable plumber Liberty Hill, TX homeowners can call for water heater repairs and other plumbing needs, OnCall Plumbing is ready to help.


Frequently Asked Questions About Water Heater Repair


Why is my water heater running but not producing hot water?

Possible causes include a faulty heating element, malfunctioning thermostat, ignition failure, or another component problem. A plumber can determine which issue is responsible.


How do I know if my water heater needs repair?

Common warning signs include inconsistent temperatures, reduced hot water supply, unusual noises, leaks, and repeated heating failures.


Can a plumber fix a water heater that isn't heating?

Many water heater problems can be repaired, particularly when they involve replaceable components. A leaking or severely corroded tank generally requires replacement.


Is it worth repairing a 10-year-old water heater?

It depends on the condition of the unit, the cost of the repair, and whether the tank shows signs of deterioration. A relatively inexpensive repair may still make sense, while a major repair could make replacement more economical.


Why does my water heater make a popping noise?

Popping or rumbling may occur when sediment accumulates inside a traditional water heater tank. Other causes are possible, so persistent or unusual noises should be evaluated.


Why does my hot water run out after five minutes?

Possible explanations include a failed heating element, damaged dip tube, undersized tank, sediment accumulation, or unusually high hot water demand.


Can hard water damage a water heater?

Mineral-rich water can contribute to scale and sediment buildup, potentially affecting heating performance and increasing maintenance requirements.


Should I repair or replace a leaking water heater?

Leaks from certain fittings or valves may be repairable. If the tank itself is leaking due to corrosion or damage, replacement is generally necessary.


Does OnCall Plumbing repair both gas and electric water heaters?

Yes. OnCall Plumbing offers water heater repair and replacement services for traditional gas and electric systems throughout its Central Texas service area.


Does OnCall Plumbing offer emergency water heater service?

OnCall Plumbing advertises 24/7 emergency plumbing assistance. Contact the office to discuss the problem and confirm service availability.


Schedule Water Heater Repair in Liberty Hill, Austin, and Central Texas

A malfunctioning water heater can interrupt your family's routine and, in some cases, create a risk of water damage or additional equipment failure.


Whether you're dealing with no hot water, inconsistent temperatures, unusual noises, or a leaking tank, a professional diagnosis can help determine the most appropriate solution.


At OnCall Plumbing, we provide water heater repair, replacement, and installation services for homeowners throughout Liberty Hill, Austin, Georgetown, Leander, Cedar Park, Round Rock, and surrounding Central Texas communities.


Don't wait for a small water heater problem to become a major inconvenience.


Need professional water heater repair?

Call 512-288-1564


OnCall Plumbing


Liberty Hill Office: 247 Clear Fork Loop, Liberty Hill, TX 78642

Austin Office: 7010 W Highway 71, Suite 143, Unit 150, Austin, TX 78735


Safety note: Water heater repairs may involve electricity, gas, pressurized water, and high temperatures. This article is intended for general homeowner education. Leave electrical, gas, and internal water heater repairs to qualified professionals.

 
 
 

Comments


bottom of page